How To Use 2 Guitars in Worship Guitar Essentials
This tutorial assumes you have a advanced knowledge of how MainStage works, and can follow instructions well. Make sure to make a backup of your original concerts in case something goes wrong, so you can start over.
This tutorial is provided for informational purposes only, That Worship Sound is not responsible or liable for your MainStage concert not functioning or breaking.
We are using
Worship Guitar Essentials 2 in MainStage 3.3 for this tutorial.
Step 1
Open your MainStage 3 concert.
Step 2
Select the patch you want to use, then click the "+" button to add a new channel strip. Make sure the
Format is
Mono,
Input 2, and
Output to
Patch Bus 1.
Step 3
The new channel strip should appear next to the first one.
Step 4
Click on the
Setting slot for the first channel strip and select
Copy Channel Strip Setting. Then, click on the
Setting slot for the new channel strip, and select
Paste Channel Strip Setting. You should now have 2 identical channel strips, one with
Input 1 and one with
Input 2.
Step 5
Final thoughts: This may or may not work for your setup. Both guitars will come through the same output, unless you duplicate the busses and other channel strips.